Interactive Hand-Controller Menus - click on green button to Navigate


This screen is for configuring custom gear ratios for custom mounts. Please see the table below for gear ratios used by some standard mount types.

You can click on any of the values and change them. If you do, your mount type will automatically be changed to custom mount.

The gears shown are for a HGM200/MI-250

This is the default gearing setting on the Gemini-2 Models by type
This is the default Gearing settings for the different types of mounts, in the Gemini-2 as  of  March 17, 2017 firmware and later.
G8 G11/
G11G
HGM200/
MI250
Titan 254 Titan3 G11T1 G8112
RA Worm 180 360 -360 -270 -270 -270 360
Dec worm 180 360 -360 -270 -270 360 180
RA Spur Gear 25 25 25 25 50 25 25
DEC Spur Gear 25 25 25 25 50 25 25
RA Motor Encoder 256 256 256 256 256 256 256
Dec Motor Encoder 256 256 256 256 256 256 256
Default RA Motor Direction CCW CCW CW CW CW CW CCW
Default DEC Motor Direction CCW CCW CW CW CW CCW CCW
Serial Mount # 1 2 3 4 6 7 8
1: is a Titan RA and a G11 DEC.    2: Is a G11 RA and G8 Dec,  3: The Titan 50 type is now just Titan,  4:The Titan 25 is no longer selectable. The HGM200 and MI250 have been combined.  The Serial mount # for the MI250 of 4 still exist in the firmware. The HGM200 serial Mount # is 5.
The Worm Ratio Count for RA and DEC are the number of teeth on the large Worm gear.
The RA and DEC Spur gear is the reduction ratio of the Gearbox.
The RA and DEC Motor encoder is the number of encoder ticks on the encoders located on the end of  the motors.
The way to tell a Titan 50 from a Titan 25, is that the Titan 50 has a sliver with rounder corners worm block, while a Titan 25 has a more squared black worm block.  Note: The Titan 50 has a 2:1 ratio gearing leading into the worm assembly, which is after the 25:1 gearbox, resulting in a total 50:1 Equivalent Spur Gear count.